you need
  • - Drill
  • - screw
  • - structural roller
  • - spatula
  • - plastic float
Prepare wall surface for the application of the decorative layer.Clean it with the old topcoat.Reinforce the walls by coating the entire surface of the acrylic primer.This solution will fill a microcracks and create between the base and a decorative covering layer, which protects against moisture and mold.
Putty can be sold in a bucket where it is contained in the finished product.If it is in a paper bag in the form of a dry mix, prepare the solution, exactly following the instructions on the package.Stir putty for 1 - 2 minutes.If necessary, add the color scheme.
to thoroughly mix the decorative filler use an electric drill.Set it a special screw and turn
the power at low revs.Note that a strong impact on grain auger blades can break the shape, structure and size of the stone will affect the texture of the surface.
Take a grater or a stainless steel trowel and fluidity apply the mixture to the wall, moving from the bottom up and leveling it.Immediately after applying putty proceed to the creation of the coating structure.
Lightly translational or rotational movements of the plastic float Organize filler.Accordingly, the surface gain produced by the movements of circular or straight furrow.
to create the effect of "scratched" grooved walls, use a fine-grained filler with natural stone or large grains.After its application walk on the surface textured roller.Apply a coarse plaster with a spatula, performing circular movements to finish reminiscent of the inner surfaces of the exotic limestone grotto.
Leave the surface to dry for 24 hours.If you want to further protect the cover, put on the walls of a special varnish.This natural stone glitter fade, but the surface acquires a matte silky shine.Lacquer decorating provide protection against moisture and penetrating into its pores, prevents contact with the mineral particles with water when washing the walls.