Tip 1: How to make a kite

Kite - is nothing but as a kind of kite. Kite s used as equipment for kiteboarding, which means skiing on water, snow or sand by pulling force of the serpent.Is it possible to make a kite for yourself?Answer - yes.
Guide
1
To make the kite, you need quite a large working area.Take the curve of the wing of the kite and attach it to the fabric (easy polyester).In order to mold do not slip, attach the paper to the fabric pins.Now use the soldering gun and cut out detail in duplicate.
2
gluing two parts, use double-sided tape 6 mm thick.
wing halves are glued overlap of 6-7 mm.
3
reinforced Now take a piece of tape and cut the width of 1.5 cm and a length of 80 cm, it is necessary to reinforce the spine seam.Then stitched tape from edge to edge of the kite, do 3 when sewing a seam "zigzag" on the edges and in the middle of the tape.
4
Sew Sew in the edge of the kite Nylon thread, as well as the use of strong cloth to strengthen the edge of the kite.NITC is sewn so that the e
dges of the bottom left hinge 10 cm in diameter. Now, take a thick waterproof fabric and double-sided tape, using them to do leading edge of the kite (6 cm width of the line).
5
Along the edges of the kite tuck 10 cm fabric, it will help strengthen the region.Next, make a pocket for attaching fittings to use this very durable fabric width of 7 cm (can go up seat belt).
6
cut a hole in the pocket for the T-connection (to do this, or use the soldering gun or a hot wire, bent into the desired shape).Do not forget using the same fabric of 2.5 * 7cm strengthen the junction lines, thus strengthening each make three holes for slings.
7
Make holes along the edges of the kite, place them in 5 cm from the edge.Please note that during installation of reinforcement there will be a lock ring.Then do
slit size of 5 cm for the upper and lower guide connector.
8
Put T-connector in the central slot of the kite.All that then remains only to insert the valve and lock it.

Tip 2: How to make a kite

Many may not know what a kite and heard this word, surely you wonder what is meant by this name.Kite - a kind of kite, the flight so that all the children love to watch.In addition, kite s common to use as the equipment for skiing on water, sand or snow.You can sew kite own.
How to sew a kite
Guide
1
Prepare a large area for the production and kite.The best option here is the private courtyard, parking place in the garage or workshop.At the same time, remember that anything you should not interfere in the work and the space should be cleared of excess litter.
2
Buy a light fabric (polyester).Take paper, A1 and apply using a pen or pencil sketch wing.Cut sketch.
3
Take the first curve of the wing, and attach it to the fabric, secure with pins or drawing pins.This must be done to ensure that the paper is not slipping on the material.
4
Take a soldering gun and using it cut part in duplicate.Glue the two cut made.This can be done by using double-sided tape, the thickness of which is not more than 6 mm.This glue halves got wings need to overlap (10 mm).
5
Priobritite pre-reinforced tape width of 1.5 cm and a length of about 80 cm. This tape is needed to strengthen the joint of the spine.Prepare sewing machine and stitched ribbon when it is necessary to do the weld 3 "zigzag" on the edges and the center of the tape and sew from the edge of the tape to the edge of the kite well.
Sew nylon thread in the edge of the kite well.
6
Reinforce edge and kite using strong fabric.Sew the thread so that the edges of the bottom hinge remained a diameter of about 10 cm. Make the front edge of the kite and using waterproof fabric and double-sided tape.The material should be selected with this dense.Width of the line should be about 6 cm.
7
Tuck on the edge all kite and about 10 cm of tissue, it will make the edge more rigid and strong.
Make a pocket of strong fabric, which will be attached fittings, stitched him to kite have.The width of the pocket, about 8-10sm.As the fabric is perfect normal seat belt of the car.
Cut a pocket using the soldering gun holes for the T-connection.Be careful, do not forget to reinforce the junction lines.It can be made of the same fabric as the pocket itself, do not forget to do this by strengthening the three holes for slings.
8
Make small holes on the edges kite and at a distance of 5 cm from the edge.Do the cuts for the top and bottom rail connectors, the size of 5 cm.
Install the snap ring.
9
Insert slots in the central kite a T-connector.Then - prepared reinforcement and fix it.
kite ready.
658
0
1
Other