- - punch;
- - wrenches;
- - adjustable wrench;
- - a hammer;
- - silicone sealant;
- - screwdriver;
- - Bulgarian;
- - rag
Shut off the cold water.Drain the water from the toilet tank old and disconnect the connector.In the case of the metal liner is necessary to cut off part of the pipe with the help of the Bulgarian and dismantle threaded connections located on the part of the aqueduct, so that the opportunity to fasten the nut flexible podvodki.Esli the old toilet flexible connection - simply unscrew it from the tank and plumbing.
Disconnect the toilet from the floor.If the toilet is fixed to the bolt - unscrew them.In the case of mounting on the cement necessary to break it down the toilet or very old, at the site of attachment, using molotka.Sleyte remaining water, turning down the toilet before.
Disconnect socket, removin
g the old corrugated drain.If the bell cast iron or plastic, it is necessary to disassemble it to the first connection or cut down the size of the new corrugated drain.
Thoroughly clean and lubricate bell sealant.Take the new corrugation, promazhte silicone and insert all the way into the socket.In order to avoid the spread of odors from the sewer pipes, sewer, cover the hole with a cloth.
Prepare polEsli the old and the new toilet same bolts, you can install the plumbing at the same place.Drill out the old plastic plugs from the floor and replace them with new ones.Make sure that the plugs tightly into holes.If necessary, drill new holes previously noted their raspolozhenie.Esli toilet was cemented, it is necessary to do a cement screed.Wait for the complete drying of the cement mortar - it can take from 1 to 3 days.Make mounting holes in the floor and hammer them in plastic anchors.
Put in place a new toilet installation and tighten bolts.
carefully promazhte bell toilet silicone sealant and put corrugation.
Connect the toilet to the water supply using a flexible liner.To do this, fasten one end of the liner to the water, pour a little water through it, and then attach the other end to the tank.
Turn on the water and wait for the tank filling and drain the water.Check for protechek.Vash toilet installed.
- «Plumbing in the house.Installation works, "A.Savelyev, Adelant 2008
- Install toilet