Guide
1
sure to notify the local gas suppliers that you plan the installation of a new gas fired boiler.It is necessary to agree with it all coming works.
2
Check Your Package Contents.Unzip the package and check the operating instructions of the mounting template, wall brackets and mounting accessories.Make sure that the boiler is in perfect condition.
3
Check Your Package Contents.Unzip the package and check the operating instructions of the mounting template, wall brackets and mounting accessories.Make sure that the boiler is in perfect condition.
4
Check the specifications on the packaging and on the identification table located inside the front cover with the data specified in the instructions.Check that the boiler
been configured to work with a specific type of gas.
5
Thoroughly wash all the pipes not only the boiler and the entire heating system to remove any debris that may have gotten into this heating system during its assembly, such as welding, cutting tubes and handlingsolvents.
6
main condition for the installation of the boiler - a smooth vertical wall on which you will install the system drowning.After all, it must not only support the weight of the boiler, and additional equipment.Note the bearing capacity of fasteners.For combustible wall, you must first attach a pad of non-combustible material thickness of 3 mm.Then boiler installed at a distance of at least 5 cm from the wall.
7
Prepare boiler separate electrical circuit with a circuit breaker and a voltage regulator.Do not forget about the grounding of the heating system.
8
distance from the boiler to the floor must be at least 80 cm, and from the side surface to the wall - not less than 50 cm. Connecting the boiler to the gas runs rigid connection - through a metal pipe and spigot paronitovye gasket.With the help of a plumb and level, check the position of the boiler installed - there should be no distortions.
9
Check tightness of threaded connections with soapy water.
10
Finally, the first start-up and adjustment of the boiler must be carried out necessarily in the presence of a technician, and with his help.