- - new toilet
- - wrench
- - brush for cleaning toilets or plunger
- - cloth or an old towel
If you buy toilet other form than the previous one, chances are that you do not match the holes for supplying and draining the water.So try to buy either identical or very similar model.
First close the valve on the pipe on which to toilet have supplied with water.This valve is usually located far away from the toilet tank, just turn it clockwise until it stops.Pressing the toilet tank, drain it of all available water there.
Using the toilet brush or sharp movements squeeze the plunger of toilet and standing water in it in the drain pipe.Completely remove it you are unlikely to succeed, but try to make it to the maximum.
Remove from the bowl and cover , set aside it aside.
toilet fixed to the floor with two bolts, which can be hidden under the protective caps.Remove the caps, using an adjustable wrench, unscrew the bolts.
tube through which to toilet have supplied water can be easily removed by hand.Be prepared for the fact that this will spill some water, so lay on the floor rags or old towel.Disconnect the drain pipe.Remove the old toilet .Replace it with a new one.
Insert the drain pipe into the hole, press it as tight as possible.Using screw bolts the toilet to the floor just as the old one, then you can connect a tube through which water is supplied.Strictly follow the sequence of actions.
Check out the new toilet for stability.If he stands firm and does not swing, you can fasten the lid on it and open faucet near the cistern.The toilet is installed.
Keep around the toilet were not formed puddle of water.Otherwise, recheck all tubes and place of their connection.