Guide
1
If a leak formed in the tube or directly to the place of its connection to the battery, take the right size piece of plastic rubber and as closely as possible tighten its strong rope or wire to the site of the leak.And if you are, in principle, we used to deal with minor repairs around the house, then you certainly can find a special metal clamp, with which you can do to stop the leak.
2
If the battery runs itself, the resulting fistula need to insert a bolt-screw.It's easy to do - a bolt block the hole and flow decrease.With this method, it is practically impossible to eliminate the leak completely, but at least you wait for the repair team in a relaxed at
mosphere.
3
When you need to close the water leakage, resulting from the depressurization joints sections to deal with this problem the easiest way.Take a cloth soaked with epoxy glue it, and then this fabric is very tight wrap spill area.This will zagermetiziruete battery , and the water stops flowing.In fact, with a little skill in the latter case, you can even do without repairmen.
4
In case if any of the following methods in your case, for whatever reason, can not be applied, and the water flows a continuous stream, take a large piece of thick fabric, absorbs water (such as a blanket orveil) and tightly wrap them all battery .So you will save the room from a hot shower and to collect water will be much easier.Well, first of all, of course, call the emergency services and call a repair team, which will deal with your professional leakage.They not only repair the damage, but will replace defective sections or pipes, or even recommend a more robust model radiators.