Tip 1: How to choose the heating system

order to become vacation home is home, not a summer residence for the season, you should install it system heating .Currently install heating is not so difficult as it was before.Ranok heating equipment provides a wide range of boilers and accessories.
Guide
1
are two types of heating systems : natural circulation and forced circulation.The natural circulation of coolant means free movement of all the pipes and radiators in the house.In such a system has its pros and cons.The positive aspects include its full independence from any kind of power and autonomy.Of course, if the boiler is not energozavisim.Also, such a system is easy to operate, that is, the temperature control and tracking system throughout the water level.
2
system heating with natural circulation consists of a boiler, pipes, radiators, expansion tank.The operating principle of the system depends on properly conducted wiring pipes.Must be able to calculate the required inclination for the pipes through which the wate
r and will naturally circulate in the system.Of course, such a system, built on the slopes, not dependent on electricity.If the boiler is operated, for example, on diesel fuel.However, there are significant disadvantages.
3
For proper operation of the expansion tank should be placed as high as possible (usually in the attic), so there may be cases of freezing.Also, the slightest change in the slope of pipes, ie kotruklone system zavozdushivaetsya and ceases to function.Heating system with natural circulation is better to use in remote homes, which are often lengthy interruptions to the light.
4
system with forced circulation is characterized by setting the pump.Who, working on electricity constantly maintains the system pressure and temperature.In such a system, no matter under what bias established breeders pipe, it all depends on the capacity of the pump.
5
Using system with circulation pump can also be used breeders pipe narrower than the natural circulation.However, such a system depends not only on the fuel to the module, but also by electricity.Currently more popular and demand is considered to be the heating system forced circulation of the coolant.

Tip 2: How to Choose a wall heating

Recently, a growing number of people in the country are moving from apartments to live in individual homes.One of the major issues that must be solved in the construction of the house, is the question of heating.Considered the most economical gas or diesel boilers, but to choose a wall heating system should take into account several factors.
How to Choose a wall heating
Guide
1
Determine what boiler capacity you need.Roughly, for heating an area of ​​10 square meters is needed by 1 kW boiler.This figure is specified depending on the degree of warming the house, ceiling height, size and number of windows and balcony doors.With a gas boiler you can heat the house with an area up to 300 square meters.m, and if the condensate - even up to 1000 sq.m.
2
Single-boilers used only for heating the interior of the house.Turbofan boiler will help you establish and hot water.Choosing his tally estimated needs of your family in the hot water and the number of connection points: a bath, a kitchen, a sink in the bathroom.Depending on water consumption, select the type of boiler: flow type, with built-in or plug-boiler.Boilers are used for recycling.
3
As a method for removing waste gases are boilers with natural and forced draft.The advantage of natural draft boilers is independent of the power supply.Boilers for forced thrust reliable and have great potential to regulate the process.They are comfortable, environmentally friendly and economical.
4
By type of firing boilers are divided into electric and piezo.Electric can ignite automatically.Pezorozzhigom performed manually by simultaneously pressing the ignition and ignition.
5
Pay attention to the degree of safety of operation of the wall of the heating system.The boiler must be equipped with a sensor monitoring the flame, which allows you to instantly stop the flow of gas when the flame will cease to burn.In addition, it should be provided the controller lock will switch off when overheated water in the boiler, as well as a rollover sensor rod - it controls the DC output of the exhaust gases to the outside.
700
0
1
Plumbing