classic version of mixers: convenient and reliable



One of the most common and usual mixers - a dvuhventilnye model.Such a device has a hospitality valves to include hot and cold water, so to choose a suitable intensity and temperature of the water jet, it is necessary to perform a series of movements.It is not always convenient.But dvuhventilnye mixers allow to achieve a relatively small flow rate and high precision temperature control, so this model is very practical.An additional advantage of such models is that they are very reliable and durable, and if the device and breaks it can be repaired with minimum effort, money and time. Such models can be complemented with ceramic discs or rubber gaskets.If the water is hard or not too quality and conta
ins impurities, it is better to choose the second option.If it is very clean - the first.


single lever mixer is very convenient because it allows you to quickly and easily turn on the water, if you have dirty hands, which is especially important in the kitchen.Moreover, you can even lift arm elbow if no other choice.Note, however, that the flow rate and the water temperature when using such devices more difficult to adjust than with dvuhventilnyh models.People often include water at full capacity, simply raise the lever all the way up, and then adjust the temperature.If you live in the house a large family, the installation of the mixer may cause appreciable overrun water.

What are modern mixers



One of the most interesting modern types of mixers - model with a thermostat and pressure compensated.Such a device is complemented by two special handles that allow you to adjust the temperature and water pressure.Both handles are complemented by numbers, so you can choose a very fine adjustments. advantage of this model is that it allows you to always maintain the desired temperature of the water, ieyou can set the mixer once, and then only to turn on and off it.

Unfortunately, the Thermostat will be practical only if they will be connected to high-quality system of independent water supply.Firstly, these devices are expensive.Secondly, they are very complex, and therefore fail faster than simple dvuhventilnye models, and their repair is much more expensive.Third, these mixers are very afraid of the strong pressure fluctuations in the system and poor quality of water.