Tip 1: How to wash

The kitchen should be clean and comfortable.It depends on the mood of the hostess and, as a consequence, a delicious lunch.If immediately after the hearty meal she enjoyed washing dishes - it means you have at home right sink.
you need
  • jigsaw;
  • drill;
  • screwdriver;
  • pliers;
  • clamp;
  • sealant
Guide
1
Before going to the store for the sink to determine the place of its installation.It is desirable that the location was close to the sewer riser, and a supply of hot and cold water was not difficult.It is desirable, but not required.Who has enough means and methods that make it easy to solve this problem.Wall or wall (if you decide to install sink in the corner of the kitchen) it is necessary oblitsevat tiles or plastic so that the spray from the water can be easily removed after washing dishes.
2
Once the installation location is selected and prepared, proceed to the selection of the washing.They are divided by the method of fixing material on the manufacturing and construction.
By way of fixing sink can be mounted on the table, under the table top in level with the top.In what form to stop it depends on your taste and how it fit into the interior kitchen.
choice of material (stainless steel or stone) depends on the size of your wallet.Sinks made of stainless steel, cheaper, have a rather attractive appearance and easy to maintain.However, stone kitchen sink ennoble.It lasts much longer and does not lose the form, but is much more expensive.
The design of washing may be different: two bowls of the same size;one cup;with the cup, and wing to the left or right;Two bowls of different sizes and so forth.
3
mount sink to the level with top or under the sink if done as a material for countertops use stone.Mounted on the tabletop is performed in the case where it is made of wood.How to install on any case is about the same.
For convenience, remove the tabletop.As template (included) to outline the basis that the front edge of the cup from the sink wall should be at a distance of 10-15 cm. This is done in order to spray when washing dishes do not fall to the floor.If the pattern is not complete, outline the shape washing.From this line back down the inside at a distance of 1-1.5 cm. Markings propylene hole in the countertop.You can use an electric or a simple jig saw with a narrow saw.The cut, clean and treat the sealant.Place the table top in place.
Before installing the sink tighten the sealing gasket (the contour of the holes in the table), then apply a thin layer of solid silicone adhesive.This is necessary to prevent moisture from seeping between the sink and countertop, thus destroying it.
With fasteners, which included, fasten sink on the countertop.Carefully trim the protruding seal.Work completed.

Tip 2: How to wash

Comfortable and cozy kitchen - the dream of every housewife.Properly selected and installed a kitchen sink to help keep order and cleanliness.However, its installation has a number of features that need to know the person who will be engaged in this.
Option sink with under counter.
Guide
1
method of installing a sink is not only its features, but also on the countertop, which will be built in sink.It can be mounted into the countertop, on the table or under the table top.
2
first necessary to determine its location.The place where the shell was originally put in the construction is not always convenient.Transfer the water to another location not be easy.Most importantly, it was convenient to use the sink.Choosing a new place to wash, keep in mind that the dimensions of the washing must add another 5-10 cm. This distance should be at least as can be broken cupboard under the sink, because the thin edge of the table just a fracture.If the distance is longer, then you will simply inconvenient to wash dishes, because that will always have to reach forward.
3
at selected locations make markup.We bought cleaning should already be ready template included.Look at the car wash package.If you throw away the packaging or on these markings not, turn the sink, put on the table.Circle the contours of which will be abroad on the sink counter.Stepping inside the encircled 1 cm path, cut a hole in the countertop.It is possible to make a thin saw or jigsaw.This will draw a side sink.
4
It is important to completely seal the seam with stoleshnitsey.Inache washing water will fall between them, destroying the bottom of the cabinet.If the seal is not complete, then buy it in advance.Apply it around the perimeter of the sink interface.He should not act beyond its edge.
5
Insert the sink into the countertop.Loosely mount, leaving the edges between the top and sink a small gap that should be filled with silicone sealant.Then tighten the fasteners.It is done along the diagonals.
6
then picks up the sink to drain.It is ready to use.
Sources:
  • Installing washing
773
0
1
Plumbing