To replace the radiator depends on whether you are changing only the radiators, or in conjunction with replacing the entire heating system.In any case, when installing new radiators should provide space for adjusting valves - with their help, you can adjust the temperature in the room.The temperature can be changed automatically with a thermostat, which is very convenient.
Instead of the old cast-iron batteries usually put aluminum, bi-metal or steel.The choice affects not only the price of the radiator and its appearance, but also the characteristics of the house where it will be installed.In particular, the high-rise building radiators should be more durable.When buying consult with a specialist at the store, it will help you choose the most suitable option for you.
Batteries always put a window clipping provided by this coming from the windows of cold air.The width of the radiator must not be less than 50-75% of the width of the window opening, otherwise there will be to create the necessary thermal curtain.Between the floor and the bottom of the radiator should be a gap of at least 60 mm.At the top of the radiator and the sill clearance should not be less than 100 mm.
When buying a radiator note the presence of his valve to release the air.If not, purchase a valve separately.With it, you can easily get rid of air pockets in the radiator, preventing the normal heating.
Before removing the old radiators need to cut off the water, this is likely to have to go to the housing office.From risers drained water, then you can remove the old radiator.Be sure to consider adding cranes all new radiators, it saves you from the hassle of the masses.In the event of any leakage, you can simply turn off the tap and easy to do troubleshooting.
to seal threaded connections, use the Linen or tango uni-lok.You should know that to ensure a tight seal with no history of such work is difficult.Flax is better to apply the sealant Unipak.Connections with paint on linen (common variant of sealing) are not as reliable - the paint dries, you may receive the drip leak.
Tip 2: How to put the batteries in a flat
Comfort and convenience apartment is largely determined by well-chosen and well-established heating devices.To the cold season in the living room can be maintained suitable temperature, should take care in advance of the installation of radiators.Such devices help to create the necessary thermal conditions and maintain health.
- - radiators;
- - control valves (thermostats);
- - tools for working with the metal;
- - sealant.
Determine whether you intend to change the entire heating system, including pipes for water supply, or restricted only installing new radiators.As a general rule, the installation of modern radiators includes simultaneous connection of devices adjustment (thermostat), that can be used as desired to change the parameters of the system and to select the desired temperature.
Select the type of heating devices.Today, instead of the usual cast-iron batteries are increasingly establish more practical aluminum, steel and bimetal radiators.The choice may affect the price of radiators required number of sections, as well as the appearance of the device corresponding to the design of the room.
Pick a place where you install the battery.As a rule, they are best to fix the windows to minimize the impact of cold air flows.The width of the battery at the same time should be approximately equal to the size of the window opening.Do not install close to radiators, floor and window sill, be sure to leave gaps in the range of 70-100 mm.
Immediately before the dismantling of the old batteries and install new equipment, disconnect the water in the heating system, coordinating their actions with the organization operating the shelter.Remove the old heater.Before you install new batteries, if necessary, set thermostats.
Hang on the wall new radiators using mounting brackets and hooks.Make sure appliances are installed securely and can not be shifted without considerable effort.Connect the supply tubes to the batteries.All fittings make sealed using linen thread or special sealant.After the installation start up the water in the heating system, check the operation of devices, if necessary, correct the deficiencies in the installation.