you need
  • - adjustable wrench;
  • - flat and Phillips screwdrivers.
Shut off the water supply to the water branch wiring supplying the device with crane selected for dismantling kranbuksy.Use the shut-off valve that separates the local layout of the total water supply.The flat armature is usually next to the central riser - pipe system extending vertically through the entire building.
2 Remove the top cover of the flywheel mounted on kranbukse.This is necessary for further disassembly of the flywheel, as is usually the lid fixing screw.The method of removing the cover depends on its construction.As a rule, it is enough to hook a thin knife and pull it up.Sometimes the lid can be secured by a threa
ded connection.In this case, unscrew it.
Remove the flywheel.Remove the screw that secures it to kranbukse.Pull the handwheel toward you.
Remove kranbuksu .Take the wrench and set the desired solution of his jaw or pick key-appropriate size.Carefully remove the kranbuksu from the apparatus in which it is fixed.Screwing produce in the direction of counterclockwise strelki.Osmotrite the inside of the socket device, which was attached kranbuksa.Check to see if there were rubber gaskets or cuffs.If so, make their removal using a suitable tool.