you need
  • - gas water heater,
  • - free access to the water pipe, - installation tools.
Determine where will be located a geyser.Usually it is a kitchen or bathroom.For security reasons, also need to install the chimney.Decide in advance where it will exit.In the presence of the house from the fireplace chimney or boiler, the hood from the speakers will be convenient to mount directly into it.
Set column vertically on the wall and as close as possible to the ceiling for the convenience of its connection and control automation.After determining the place of mounting drill holes and install the special plugs that are provided to the column.Then screw the column to the wall with screws.
Move gas.To do this, connect the pipe to
the special tee, which then screw the tap.The pipe from the speaker to the tee, attach clips to the wall.It is recommended to install the clips through the meter.Connect to the column tube by means of the fitting nut and invoice.
Connect the gas column, previously blocked the water supply.In each of the pipeline put the tee.Clips along the wall, attach the tube to the column.Between the columns and the water pipe and put a filter plug using the fitting and nut.