you need
  • - wrench;
  • - nut or washer of suitable diameter;
  • - a hammer;
  • - chisel or screwdriver large metalwork;
  • - Saw-Bulgarian;
  • - silicone sealant.
Guide
1
If toilet installed with special pins, mounted "firmly" in the floor, remove it without destroying the fasteners.Remove the liner of water to the cistern, after closing the valve.Remove the nuts from the studs and remove the toilet .
2
Remove toilet ny release of bell sewer pipe.At stud rings set of screws or other metal objects of appropriate diameter in terms of a new floor.Reinstall toilet , Start release toilet and sewer pipe into the socket and tighten the nuts on the studs.
3
If mounted toilet "on anti-handling devices", gently break the tiles and cemented
around toilet a hammer and chisel, drill, drill, large locksmith screwdriver or other suitable tool.Cut the old stud, "Bulgarian" and remove the toilet , disconnecting the tank from the pre-tubes with water.
4
exhibitor toilet to desired level with the nuts and washers of appropriate size.Lubricate with silicone sealant corrugated transition sleeve and connect release toilet and sewer pipe to the neck.After mounting holes secure toilet in the concrete floor anchors and washers.