Before installation, prepare the bath room: perform finishing work and set the filter mechanical treatment.Connect and test run the bath with an expert.
Before filling the tub with water, close the drain plug.Turn on the water.If the mixer 3-component, with two handles, adjust the pressure by turning the knob (marked with a red - hot water, blue - cold) left and right.The switch, located in the middle, put in the right position: right - to fill the bath, left - shower.In 2-component mixing water temperature is regulated by turning the knob to the right and to the left, and head - lifting up.
typed When the water to the desired level, proceed to launch a whirlpool.Press the power button, it sho
uld light up red.If the motor does not turn on, make sure that the water level sensor is located under the lever drain.To stop the engine press the button again.Strength of massage adjusted using rotary dial.
If the bath with electronic control, start with pressing the button on / off, located on the control system.The display will light up in green, and make available all the functions.To turn off, press the button again.
To talk on the phone in case of an incoming call, press the button on the toolbar with the image of your phone and start talking.In the conversation stops working hand shower, there is a temporary shutdown of the motor.To resume their work after a call, press the phone button again.
To activate the speakers of the input signal from the CD-player, press the button on the dashboard CD.To turn off - press again.
To turn on the shower, press the button with the image of a watering can, to turn off - repeatedly.To maintain the water temperature in the control panel, press the button C. When the temperature drops, the system automatically connects and brings it to the selected level.The system does not work, if the water level is below the position.Turn off by pressing the button.
Tip 2: How to activate speed dialing
Speed Dial (Speed dial) - a feature of modern browsers that allows you to add multiple pages to your bookmarks and display them in a new tab window.So you spend less time clicking links to your favorite sites.Just open a new tab and click on the image web page.
- - a computer with Internet access;
- - browser.
Connect add-on "Speed Dial" in the browser Mozilla Firefox, for this paste into the address bar of the program link https://addons.mozilla.org/ru/firefox/addon/fast-dial-5721 /, on the page, click "Download Now."Wait for the plug-in, restart the program.
Then use the key combination Ctrl + T to open a new tab in the speed dial.Go to your browser, set as your home page blank page (about: blank), then the Quick Start page opens automatically when loading the browser.
To add a page to a quick start, click on the right mouse button in the context menu, select "Add to Fast Dial».To select the themes go to http://userlogos.org.
activate speed dialing in the browser "Opera".To do this, update the version of the program, because this feature is available since version 9.2 (2007).In Opera Speed Dial - This page with nine frames, each of which can add a link to the site.
To change the number of sites in fast access, go to the folder where the program is installed, open it with the program "Notepad" file speeddial.ini, at the beginning of the file, add the following lines: [Size] Rows = «Typethe number of rows in the fast start », Columns =« Enter the desired number of columns ".If you set the number of lines 5 and column 6, respectively, in the quick start you fit 30 sites.The amount is selected depending on the resolution of your screen.
To install the plug-in Quick Launch in Google Chrome, click on the link https://chrome.google.com/webstore/detail/dgpdioedihjhncjafcpgbbjdpbbkikmi?hl=ru and click "Add".Next, open a new tab and add sites to frames by right-clicking on the square with a digit.