If the clothes have stains from smoke and soot, they are removed by washing.But first stains moisten with turpentine, then wash the item in soapy water and rinse thoroughly.If the stains are very old, in turpentine, add egg yolk and knead until a density of sour cream.
The mixture is then carefully heat the better to do it on a steam bath and rub the stain with this mixture.Next thing wash with soap and rinse with clean water several times.If the stain is fresh, it will help a crumb of bread.Rub bread contaminated area, then wash in warm water.
If you do clean the room, where a lot of smoke and soot, wear rubber gloves, old clothing, headgear, if necessary, dust mask and safety goggles.Start with a dry cleaning using a vacuum cleaner or a broom.Remove soot as follows: downward short movements.
After dry cleaning make wet.You can make the cleaner of two tablespoons of baking soda and 2 cups of hot water.Sooty place flush with the mixture using a washcloth.If there is soot on the ceramic tile, here you will be detergents to remove fat, they are in the store household chemicals.
Soot can try to remove wallpaper using washing powder for white laundry that contains bleach.On the plastic surface stains from soot well cleaned "Domestos".Help to combat soot 2% solution of hydrochloric acid and products containing chlorine.
Spot soot contains fat.Therefore, pre-stain can be treated with petrol or white spirit, and then wash with soapy water.And if you want to get rid of the smell of burning and smoke, then come to the aid of coffee.Sprinkle it in several places, it absorbs odors and breathing becomes easier.
Tip 2: How to remove soot
reason for reducing the efficiency of your car can be a high content of soot and carbon deposits in the cylinders of the engine.The engine can run for some time, even after you turn off the ignition.From the muffler will come a characteristic black smoke.In addition, because of the surplus of soot in the engine cylinder can no apparent reason to heat up, and also because it can be heard the ringing sound of metal.All of this suggests that soot and carbon deposits is time to get rid of.
The accumulation of soot in the cylinder inevitably also increase fuel consumption by 10-15%, not to mention the other unpleasant consequences, so delay the cleaning of cylindersnot worth it.To remove soot and smoke , you need to remove the cylinder head and remove all dirt from the surfaces of the cylinder head, the piston crown, as well as all working surfaces mechanically.The most common tools: brushes, metal and wooden scrapers.You can moisten all contaminated kerosene space - it will be easier to get rid of grime.These procedures make the service station, but if you take your car to have no desire to try to remove carbon deposits themselves, not looking at the engine.
must first warm up the car.Then, in each of its cylinder fill 20 ml of kerosene (80%) and oil (20%).Now turn the crank crankshaft six to eight turns.Allow the machine safely continuously 15-20 hours.
When sufficient time, start the engine and let it about half an hour to idle.So the bulk of the soot and carbon deposits should burn.The meaning of this method lies in the fact that while the vehicle is stationary with the mixture filled into the cylinders, a deposit is softened.Crank the engine, you make a deposit from soot th move away from the surface and fly out through the exhaust pipe.
Only you need to know that this method is less efficient than the dismantling and removal of the engine cylinder head, followed by mechanical cleaning.It is advisable to use it only in extreme cases and with a relatively small cluster of soot.And again, after cleaning the motor described method replace the oil filter and engine oil.
- removing soot
- stains from soot