- Washing powder, liquid soap, a special solvent for the equalizer, rubbing alcohol, refined petrol, ammonia, denatured alcohol, white spirit.
Prepare a soap solution.To do this in a basin of hot water dissolve a little bit of detergent or liquid soap.Submerge soiled clothing in the liquid and leave it for 30-40 minutes.After this time, rub the stain with a brush and rinse the fabric.This method is effective for removing bar and a water-based.
Take special dissolving composition.It can be purchased at an office supply store.Put soiled clothes on a flat surface and scrape corrector blunt side of a knife or a metal nail file.Gently apply the tool on the spot using a cotton swab or small brush.Wait for a while.Then blot the treated area with a paper towel o
r cotton pad.
Take rubbing alcohol or vodka to get rid of traces equalizer on clothing.Moisten a cotton pad in the liquid and dab the stain.After 10-15 minutes, repeat the procedure.Then rinse the fabric thoroughly under running water and wash in warm soapy water.
Buy the hardware store refined petrol.Moisten a cotton ball in the solvent and rub the stain from the corrector.Before embarking on the immediate cleaning, make sure that the material is resistant to the tool.Apply a drop of solvent on a back seam.If after a few minutes did not change the color of the fabric, continue treatment.
Mix ammonia with warm water in a ratio of 1: 1.Saturate the stained portion of the solution and leave for 10-15 minutes.After flush trace of corrector in clean water.You can also soak the clothes in soapy water with the addition of ammonia.
Moisten a cotton pad with denatured alcohol or mineral spirits attach to the contaminated sites.After 15-20 minutes rinse the cloth with water.If there are traces from the corrector, use a stain remover.