you need
  • curtain fabrics
  • beam across the width of the window
  • Screws with rings
  • small nails or furniture stapler
  • Hammer
  • Centimeter
  • Pencil
  • Scissors
  • sewing machine needle and thread
  • Rods-strap on the number of folds
  • cord
  • Rings
  • Velcro across the width of the window
  • stopper holder
  • hook for fixing the cord to the wall
Guide
1
is important to choose the right fabricto the right to make Roman shades.It is recommended to use a dense, but not too heavy canvas - then folds neatly prepared and will not look too rough.For example, it is well suited for this pur
pose otrez flax.
2
carve out Roman shade according to the size of the window.If the wooden block for fixing curtains installed directly in the window opening, you will need to measure the length of the curtains to the sill.When locking bar on the wall or on the ceiling will look beautiful long curtains to the floor.To design to function properly, do not make the curtain wider than one and a half meters.For a large window you will need two Roman blinds.
3
Make allowances on the side seams of 2-3 cm. The lower and upper hem calculated taking into account the fact that the bottom you will have to pass a bar, plumb line of wood or metal, and the top - sew Velcro.Also, leave 1 cm margin to the possible length of the shrinkage after washing curtains.
4
Stitch all seams and folds.At the bottom make the two lines so that between them passed weighting.Top sew by hand one piece of Velcro;You attach to another timber with nails or small furniture stapler.
5
Schedule on the wrong side of the web space wrinkling "bunching."For the standard window you should have four kuliske with a distance of 30-35 cm between each. In the center of kuliske shape transverse folds, folding the fabric and sew it at a distance of a centimeter from the edge.Here you insert a thin strap.Carefully otutyuzhte all the folds and seams.
6
Nasheyte fold lines of the future "accordion" at regular intervals small rings, which can be bought in hardware department.You should have a clear horizontal rows of 5-6 rings.
7
Now you need to hang the curtain Roman and construct its hoist.To do this:
• At the bottom of the Velcro on a bar screw screws at regular intervals with rings instead of the cap (they are sold in the shops of building products).
• Attach curtain all vdet weighting.
• A top ring miss cords, secure them to the bottom ring.Cord length - the width of the curtains, and two of its length.
• Draw cords through the rings on a wooden board.
• Gather together and drag them through a special holder-stopper by placing it on the edge of the timber.
• Align the ends and tie them with a knot.
8
Fit on the wall (at the middle of the window opening) special hook for fixing the curtain grabs.Adding the "accordion", wind the cords on him.