- - sewing supplies
- - fabric
- - Tape-velcro
- - furniture stapler
- - weighting strap
- - border
- - rings
So, to make yourself Roman shades, you need to start with the material.Typically used for sewing curtains tight and dry cloth.However, the curtains of transparent and translucent fabric does not look less attractive.
Before you go to the salon tissue, to identify and to the size of the future curtains.It can meet the full size window or close it from the ceiling to the floor.
Removing measurements, be sure to throw more on each side by 5 cm for seams.
For example, the height of your window
is 150 cm. To make Roman shades yourself, take the fabric and the back of the chalk mark the folds and setting rings.The distance between the folds should not exceed 20 cm. Thus, they you should have exactly 7.
sure to treat all of the lateral edge of the fabric.
Fasten Velcro tape to a wooden plank with nails or furniture stapler.
to Roman shades can be easily removed, and sew to the upper edge of the curtains the same with Velcro.
lower part of the curtains have to be made to the gateways, which should fit weighting strap.
Take a finishing hem and sew it marked spaces between the folds.Then take rail and sticks it in every border.
On each of these should be placed on the border of three rings at an equal distance from each other.If a wooden rake, and the ring can be fixed with nails.
Now you can attach the curtain to the wooden bar with Velcro and attach the cord to the window frame.
Starting from the bottom of the curtains, thread the cord through each ring up to the top and pull tight enough.
In this position, attach the piece of wood to the window and release a ready-made Roman shades.
- how to sew roman shades to