you need
  • detergent, ammonia, white spirit, denatured alcohol, a special solvent for the equalizer, refined petrol.
Guide
1
Pour hot water into a bowl, add a bit of laundry detergent or liquid soap and stir.Soak the stained clothes in the solution and leave for 30-40 minutes.Then wash and rinse the fabric in running water.This method is effective enough to remove stains from corrector water-based.
2
use ammonia.Dilute it with warm water in a ratio of 1: 1.Moisten a cotton swab in the solution and apply to the stain from corrector .After 15 minutes, wipe the contaminated area.You can also soak the garment in warm soapy water with the addition of ammonia.
3
Take mineral spirits or denatured alcohol.Put clothes on the table in the expanded state.On the wrong side attach the gauze or cloth, folded i
n several layers.Then soak a cotton ball in the solvent and carefully remove traces of corrector .If the stain is small, use a cotton swab.
4
Remove stains using a special solvent liquid, which is usually sold with a proofreader.To start scrape off dried-contamination with a knife or your fingernail.Then brush or cotton swab, apply a means to spot and wait a couple of minutes.After this time the blot the treated area dry white cloth or cotton swab.Wash clothing with the addition of stain remover and rinse under running water.
5
Clean the stain from corrector unleaded petrol.To do this, apply to the contaminated sites a cotton or gauze soaked in gasoline.Wait a few minutes and then remove the stain.This method can be derived from the spot corrector , which is composed of various oils.Be extremely careful, not every material is able to withstand handling gasoline.
6
Before the removal of stains, test the fabric for resistance to solvent.Apply a drop of funds for inconspicuous section clothes , wait a few minutes.If after this time the fabric is not changed its color and texture, continue cleaning.