Tip 1: How to sew a cover for stools

Stools - wooden, plastic or metal chairs without back, with square or round seats.Due to the absence of the back, they are less bulky than conventional chairs and more stable.This comfortable furniture for the kitchen or children's room.The seat stools are often made of hard materials without upholstery, so for those who want to get more cozy, you can sew a cover for stools with foam.
you need
  • Heavy upholstery fabric length of 2 3 cm width stools
  • 9 flat buttons
  • piece of foam thickness of 1-2 cm in size seat stools
  • braid or a piece of string 1-1.3 m
Guide
1
Turn the stool legs up, put it on paper or on any piece of paper and draw the contour of the seat.This will be part A. Cut out the resulting pattern and cutting of the fabric two identical parts A, adding on each side of 1 cm at the seams.
How to make stools
2
Cut out the remaining details in the fabric 4, which is equal to the longest side of the seat stools plus 2 cm at the side seams.To learn the details in width, measure the thi
ckness of the seat of the stool and multiply it by 4. This will be the side of the cover.
3
Similarly for details A square-cut foam.Put it between the fabric and the edges of hand prometayte large stitches, departing at 1 cm. Sew a seam on a typewriter.
4
Mark the place where the buttons are sewn on.To this end, a thin piece of chalk or soap raschertite upper part of the cover on the grill 4x4.The lattice sites sew on buttons.
5
Sew the side of the cover on each side.Leave at all sewn seam allowance, then iron them on the wrong side.Defer them from the cover, but not until the end, a distance equal to the width of the seat of the stool.
6
then iron the edge of the long sides of the side seams inside, fold in half and stitched in kuliske.Pass it braid, put Case on a stool and tie tightly braid, tuck under the ends of the assembly Case .

Tip 2: How to sew a cloak for the stool

If the general view of the apartment no longer suit you, do not just run for building materials, and to begin to make repairs.It is enough merely to make the interior of the room "flavor".For example, make a beautiful cushion stools.
How to sew a cloak for the stool
you need
  • fabric, hook, thread, pattern
Guide
1
To make the usual, nothing attractive wooden stool soft and beautiful, you must makefor her cloak-bag.To do this you need small pieces of furniture fabrics, cotton yarn and a hook № 1.5.
2
If the seat of the stool has a square shape, the process of tailoring capes will be the next.
The first step will be the creation of its patterns.To do this you need to measure the dimensions of the seat of the stool and add to them for a stock of 10 cm (length and width) and 3 cm (height).For example, if the seat has side dimensions of 32cm and a thickness of 2 cm, the pattern will cover a square with sides of 42cm, in the corners which made deep cuts by 5cm.
3
Once the pattern is ready, put the pieces of her furniture fabrics, which should be prepared in advance.Pieces of prefabricated tissue before applying to crop (podkroit) so that they could completely fill pattern.At the same time intervals between adjacent parts should not exceed 3-5 mm, as it is this distance is the width of the seam or double-wide binding.If the gap would be larger then the connection parts will decrease the size of capes, as a result it may not fit on a stool, and so the work was done in vain.If, conversely, the details were loosely connected, it could lead to other consequences - the product will be short-lived.
4
For edging patches can use the harness hook.To do this, each piece on the perimeter need to tie one or two rows of columns without nakida thread, then sew the parts of the two half-loop-braids, and steam the seams slightly.In that case, if you do not know how to knit, you can just stitch the seams on a typewriter, and then decorate them with silk ribbons, lace or ribbons with sequins.Moreover, threads and ribbons should be chosen so that they contrast with the basic fabric.
5
cutouts made on the corners capes should carefully sew.
6
In the event that the stool has a circular or triangular shape to create a pattern for the cloak will be more difficult.You have to put a stool seat down on the paper and cut around its outline.Stepping 5-6cm, draw another line, which is required to make darts.Then you do the same, namely, close lay out pieces of cloth on the pattern and process of the region.
Sources:
  • how to crochet a cape on a chair
Sources:
  • how to sew covers for stool
518
0
2
Carpets, Curtains, Fabrics