- - 10-20 g dye
- - ammonia 25% 25 ml
- - Chrompick 40-50% by weight of the dye
- - 945 ml of water
- - brush to paint
Clean, wash and dry the carpet.
Bring to a boil the water.
Pour in the water and dissolve the dye and ammonia.
Boil the resulting solution for 5-8 minutes.
Cool the solution to 40-45 ° C.
Dissolve in a little water Chrompick.
Mix the two solutions.
Filter the solution through a cloth or cotton wool.
Apply the paint on the carpet with a brush.
Thoroughly dry the carpet.
Remember that after steaming (consolidation) chrome dyes significantly change their color.To avoid unexpected shades before painti
ng should be carefully prepared vykraski on the carpet before and after Park your vehicle.Working with chrome dyes, as well as any other, must adhere to certain safety standards.Avoid contact with the dye on the skin, mucous membrane of the eyes and mouth.On the clothes the substance may leave stains that are very difficult to remove in the future, so think in advance what exactly you will be painting the carpet.On hand is best to wear gloves.Respiratory protection required corresponding mask.Are colored in a well-ventilated area or equipped with special ventilation hood.
In order to strengthen the color of the carpet produced by chromic dye, you need to park the implement process.To implement it will need a medical autoclave.The first colored carpet should be well dried.Then he shifted to cotton cloth or absorbent paper.Then gently and loosely rolled up carpet.The autoclave is well warmed up and put him in a carpet.Scalding temperature should be about 104 ° C.By the time the carpet should be kept in an autoclave for at least 60-90 minutes.Excessive pressure better set at around 0.3-0.5 atmosphere.Then the carpet for a long time retain its rich and vibrant color.